The Five Steps of the Boot Sequence

Techwalla may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.
Every computer, regardless of size, must have a boot process.

Computers large and small must have some type of start-up process, which is typically called the "boot" process. During this set of steps the computer checks itself to be sure all is well, loads some minimal operational software and loads the operating system. The term "boot" is a shortened version of the word "bootstrap," which was used in the early days of computing to describe the process whereby the computer pulled itself up by its "bootstraps."

Advertisement

Power Up

Video of the Day

The first step of any boot process is applying power to the machine. When the user turns a computer on, a series of events begins that ends when the operating system gets control from the boot process and the user is free to work. When the computer is turned on, the central processor executes some startup code in ROM that is located on the motherboard.

Advertisement

Video of the Day

Power-On Self Test

The next step in the boot process is called the POST, or power on self test. This test checks all connected hardware, including RAM and secondary storage devices to be sure it is all functioning properly. After POST has completed its job, the boot process searches the boot device list for a device with a BIOS on it.

Advertisement

Find a Boot Device

The I/O system is essential to the operation of the computer because it defines the rules for communications between the CPU and the other devices attached to the computer via the motherboard. The I/O system, sometimes found in the "io.sys" file on the boot device, provides extensions to the BIOS located in ROM on the motherboard.

Advertisement

Load the Operating System

Once the hardware functionality is confirmed and the input/output system is loaded, the boot process begins loading the operating system from the boot device. The OS is loaded into RAM, and any instructions specific to the particular operating system are executed. The actual operating system is somewhat irrelevant, as the computer will follow the same boot pattern in any case.

Advertisement

Advertisement

Transfer Control

Once the previous steps are complete and the operating system is safely loaded into RAM, the boot process relinquishes control to the OS. The OS then proceeds to execute any pre-configured startup routines to define user configuration or application execution. At the end of the handoff, the computer is ready for use.

Advertisement

Advertisement

references & resources